About This Guide; Documentation; Introduction; Phone Features - Aastra 9112i User Manual

Release 1.4
Hide thumbs Also See for 9112i:
Table of Contents

Advertisement

About This Guide

This guide explains how to use
your new 9112i phone. Not all
features listed are available by
default. Contact your system
administrator to find out which
features and services are available
on your system. Your system
administrator also has the ability to
customize some features on this
phone.

Documentation

• Aastra SIP IP Phone 9112i
Installation Guide – installation
and set-up instructions, general
features and functions, and
basic options list customization.
This guide is included in the box
with your phone.
• Aastra SIP IP Phone 9112i User
Guide – explains the most
commonly used features and
functions. This guide can be
downloaded from
www.Aastra.com
• Aastra SIP IP Phone 480i/
480i CT/9112i/9133i – explains
how to set the 9112i phone up on
the network and contains
advanced configuration
instructions for the 9112i. The
Administrator Guide has
instructions that are at an
adminstrator level.

Introduction

The 9112i IP telephone has all the
features of a regular business
phone, allowing you to make and
receive calls, transfer, conference
and more. The 9112i IP telephone
provides communication over an
IP Network using the SIP IP
telephony protocol.

Phone Features

• Three-line backlit display screen
• 2 Programmable buttons, which
can be programmed as speed
dials
• Full-duplex speakerphone for
handsfree calls
• Built-in single port, 10/100
Ethernet jack
• Power adapter

Requirements

• A SIP-based IP PBX system or
network installed and running
with a number created for the
new 9112i IP phone.
• Adherence to SIP standard RFC
3261.
• Access to a configuration server
where you can store the
firmware image and
configuration files. The
configuration server must be
able to accept connections
anonymously (if TFTP is used).
• The IP phone must be
configured for a specific type of
protocol to use. (TFTP is enabled
by default). You can configure
the following protocols on the IP
phone:
– TFTP (Trivial File Transfer
Protocol)
– FTP (File Transfer Protocol)
– HTTP (Hypertext Transfer
Protocol)
• A 802.3 Ethernet/Fast Ethernet
LAN
9112i IP Phone User Guide
1

Advertisement

Table of Contents
loading

Table of Contents