Setting "Park/Pickup" Keys - Aastra 9112i User Manual

r
2. Use the and
through the customized
features.
3. For menu and directory services,
select a service to display the
information for that customized
service.
Message services display to the
screen after pressing the
programmable key.
For user input services, follow
the prompts as appropriate.
4. To exit from the "Customized
Features" screen, press the XML
programmable key again.

Setting "Park/Pickup" Keys

The 9112i phone has a park and
pickup call feature that allows you
to park a call and pickup a call
when required.
The IP phones support the Park/
Pickup feature on the Asterisk,
BroadWorks, Sylantro, and ININ
PBX servers.
You can set the programmable
keys on the 9112i to use the park/
pickup feature by setting a
programmable key as "Park" or
"Pickup" and then:
Park/Pickup Call Server Configuration Values
Server
Aasterisk
Sylantro
BroadWorks
ININ PBX
a. Leave "value" fields blank to disable the park and pickup feature.
Use the following procedure to
configure park/pickup on the 9112i
phone.
s
to scroll
Park Values*
700
a
98
a
68
callpark
• specify a value
Note: The values you enter for each
softkey are dependent on the
type of server you are using
(Asterisk, BroadWorks, Sylantro,
or ININ PBX).
The park/pickup feature performs
as follows:
• When a call comes in, and you
pickup the handset, you can
press the applicable "Park"
programmable key to park the
call.
• After the call is parked, you can
press the "Pickup"
programmable key, followed by
the applicable value to pickup
the call.
You configure a Park and Pickup
programmable configuration using
the Aastra Web UI.
The following table provides the
values you enter for the "Park
Call" and "Pickup Parked Call"
fields in the Aastra Web UI.
Configuring Park/Pickup
Pickup Values*
700
a
99
a
88
pickup
9112i IP Phone User Guide 11