Aastra 9112i User Manual page 37

refer to the "Adjusting Volume
section" in the Aastra SIP IP
Phone 9112i Installation Guide
provided with your phone.
Why is the light not coming on
with a new Voice Mail Message?
Your phone system or service
provider must provide "Visual"
Message Waiting service for this
function to work. Check with your
system administrator for more
information.
How do I find the IP address of
my phone?
Instructions on where to find the
IP address of your phone can be
found in this guide in the section,
"Finding Your Phone's IP
Address" on page
How do I change my user
password?
You can change the user password
from the IP phone UI or the Aastra
Web UI.
IP Phone UI
I
1. Press
enter the Options List.
2. Select User Password and press
U.
3. Enter the current user password
U.
and press
4. Enter the new user password
U.
and press
5. Re-enter the new user password
U
and press .
A message, "Password
Changed" displays on the
screen.
4.
on the phone to
Aastra Web UI
1. Click on Operation→User
Password.
2. In the "Current Password" field,
enter the current user password.
Note: By default, the user name is
" user " (all lowercase) and the
password field is left blank. If
you have forgotten your
password, contact your system
administrator for assistance.
3. In the "New Password" field,
enter the new user password.
4. In the "Password Confirm"
field, enter the new user
password again.
5. Click
changes.
For information on how to access
the Aastra Web UI, go to the
section "Accessing the Aastra Web
UI" on page 5.
Why does my phone display
"Bad Encrypted Config"?
The IP phone displays "Bad
Encrypted Config" because
encrypted configuration files are
enabled but the decryption process
has failed.
Report this error to your system
administrator.
9112i IP Phone User Guide
to save your
31