Table of Contents
Advertisement
6
Preparation For Installation
The MediaHub Mini is designed to be installed in furniture.
Ensure the location chosen for the equipment complies with the
requirements of the "Important Safety Instructions" on pages 3 and
4 of this guide.
A cutout will need to be made in the furniture. Other than this the only
tool you will need is a medium sized cross head screwdriver.
Cutout dimensions are given in the "Installation" section of this guide.
In addition to the items supplied with the MediaHub Mini you
will also need:
• an HDMI cable (see HDMI Cables below).
Depending upon your installation you MAY also need:
• a flexible HDMI cable adaptor (see HDMI Cables)
• a USB cable (see USB Cables),
• a serial cable (see Serial Cables).
Please contact TeleAdapt about these additional items (see contact
details on page 21 of this guide).
TVs and System Integrators
Before installation you should be satisfied that the TV model
selected and/or system integrator is configured to work with the
MediaHub Mini and that all necessary control mechanisms (CEC
or serial) and cabling are defined and in place. You can find
more information about this in the "Additional Information" section
(page 12), or contact TeleAdapt for help and advice (see contact
details on page 21 of this guide).
Hide quick links:
Advertisement
Table of Contents
