Advertisement
6
What is Included In The Box
1 x PowerHub USB-C Main Unit with Power Cord and Duplex Plug
1 x Black or White trim
1 x Black or White Metallic trim
4 x Fixing screws
1 x Installation Guide
Preparation For Installation
The PowerHub USB-C is designed to be installed in furniture.
Ensure the location chosen for the equipment complies with the
requirements of the "Important Safety Instructions".
A cutout will need to be made in the furniture, cutout dimensions are
given in the "Installation" section of this guide. Other than this the
only tools you will need are a medium sized cross head screwdriver.
The PowerHub USB-C requires power from a standard 3-pin US
120V outlet.
Installation
Before starting installation make sure you have read and understood the
"Important Safety instructions".
Step 1
Confirm the furniture cutout dimension to accommodate the PowerHub
USB-C is within the limits shown below. Note that in addition to the mini-
mum depth requirement of 60mm (2.36in) there should also be at least
50mm (1.97in) clearance below the unit to allow cabling to exit cleanly.
Step 2
Remove the PowerHub USB-C, trims and screws from the box.
Step 3
Thread the rear power cable through the cutout in the furniture.
7
Advertisement
