Table of Contents
Advertisement
8
If the furniture you are mounting in is constructed of material which
is greater than 18mm thick OR if your HDMI cable does not conform
to the connector dimensional requirements then you should use the
optional HDMI cable adaptor which is available from TeleAdapt.
This adaptor fits into the rear HDMI socket and provides a floating
HDMI socket.
USB Cables
It is recommended to use TeleAdapt supplied USB cables that are
fully compatible with the MediaHub Mini. If however, you choose to
supply your own USB cable, then you should ensure that the total
length (including any cabling from the front of the MediaHub Mini to a
guest device) does not exceed 5 metres. Use of USB repeaters is not
recommended, but if used any such device must be qualified by the
supplier of the USB host device.
Serial Cables
It is recommended to use TeleAdapt supplied serial cables that are
fully compatible with the MediaHub Mini. If however you choose to
supply your own serial cable then you should ensure that the maximum
length does to exceed 15 metres. It is also important to carefully follow
the RJ45 pinout and functionally test any cabling before installation.
See Additional Information for RJ45 pinout.
IMPORTANT NOTE: Although the serial connection uses an
RJ45 connector it is NOT compatible with Ethernet, LG RJP or
other non-RS232 compliant interfaces that may also use an
RJ45 connector. Connecting the MediaHub Mini to a non
RS232 compliant interface can cause permanent damage to
the MediaHub Mini and may invalidate the warranty.
Hide quick links:
Advertisement
Table of Contents
