Table of Contents
Advertisement
24
en | Maintaining the system
See also:
–
–
8.2
Recovering the unit
Following procedure describes how to restore the factory
default image.
Notice!
Before recovering DIVAR IP we recommend backing up the
configuration.
To restore the unit to factory default image
1.
Notice!
Make sure that a VGA monitor, a keyboard and a mouse are
connected to the unit.
2.
2014.07 | V1 | DOC
Obtainging a basic configuration, page 20
Advanced configuration, page 21
Start the unit and press F7 during the BIOS power-on-self-
test.
The Recovery menu is displayed.
Select one of the following:
–
Initial to factory image (all data will be deleted)
(restores to factory default image and deletes all data
on the HDDs)
or
–
Restore to Factory image (all data will not be
deleted)
(restores to factory default image; data on the HDDs
will not be deleted)
Note:
Windows performs the setup. The screen displays the
percentage of the process.
DIVAR IP 2000
Bosch Sicherheitssysteme GmbH
Hide quick links:
Advertisement
Table of Contents
