Table of Contents
Advertisement
Bosch Motorsport
14 Clone the Unit
To replace a MSI 60 by another device, it is possible to clone it. A clone is a 1:1 copy of a
device. This can be useful for copying specific data, like sensor-offset calibration to a
spare unit for a specific car.
Create a clone file
1.
Open the 'Tools' window and click on the 'Clone' button in the 'Extras' menu.
2.
Select "Extract" from the dropdown menu.
3.
Choose the hardware device, which should be cloned.
4.
Define destination and filename.
5.
Click 'OK' to start procedure.
Modular Sensor Interface MSI 60
Clone the Unit | 14
109 / 120
Advertisement
Table of Contents
