Decoding Other Stream Types - Datavideo NVD-20 Quick Start Manual

Network Video Decoder
NVD-20
Simply copy the RTSP URL from the 'Live' tab of the NVS-20 and
enter it into the 'Input Stream' field on the NVD-20
When the NVS-20 is in HLS mode
The NVS-20 does not currently publish its full HLS stream URL. To
decode its local HLS stream please copy the URL below replacing the
IP address with that of your NVS-20 unit and enter it into the 'Input
Stream' field on the NVD-20.
http://admin:000000@192.168.16.69/hls/live.m3u8
If on the NVS-20 you have changed the password from the default of
000000 please also replace the six zeros in the URL above with your
new password
Please Note: When in HLS mode the buffer size should be set to 0.7
seconds or higher.

Decoding other stream types

To decode other stream types such as UDP multicast simply enter the
stream URL into the 'Input Stream' field of the NVD-20.
Listening for a Pushed UDP Stream
To listen for a pushed UDP stream enter the following URL into the
'Input Stream' field of the NVD-20.
UDP://@:9710
Replacing 9710 with the port number of the pushed stream.
19