Bellini BDI904SFBG-F Installation And User Manual page 10

：
Example To set it as 95 minute minder
1. Make sure the cooktop is turned on.
Note: you can use the minute minder even if
you're not selecting any cooking zone.
2. Touch timer control, the minder indicator
starts flashing and "10" will show in the timer
display.
3. Set the time by touching the silder control .
4. Touch timer control again, the "1" will flash.
5. set the time by touching the slider control,
now the timer you set is 95 minutes.
6. Buzzer will beep for 30 seconds and the
timer indicator shows "00" when the setting
time finished.
NOTE:
Minute minder won't interrupt cooking progress
but just give a sound beep.
Cancel the timer:
1. Touching the heating zone selection control that you want to cancel the timer
2. Touch the silder control to canc el timer setting. Display will show 00.
：
Example To set it as 95 minute timer
1. Touch the heating zone selection control that
you want to set the timer for.
2. Touch timer control, the minder indicator
starts flashing and "10" will show in the timer
display
3. Set the time by touching the silder control .
4. Touch timer control again, the "1" will flash.
5. set the time by touching the slider control,
now the timer you set is 95 minutes.
6. When time is up, the corresponding cooking
zone will be switch off automatically.
NOTE:
You can repeat above step 1 to 5 to set other
zones
The red dot next to power level indicator will
illuminate indicating that zone is selected.
When several timers zones are set, display only
show the shortest timer duration.
If you want to see timer setting for a particular
zone, simply touch the zone selection button.
10