Bellini BGM604 User Manual
Hide thumbs
Also See for BGM604:
- Installation & operation instructions (29 pages) ,
- Installation & operation instructions (26 pages) ,
- Installation & operation instructions (28 pages)
Related Manuals for Bellini BGM604
Summary of Contents for Bellini BGM604
- Page 1 Gas cooktop user manual For warranty service call 1300 373 199 (Australia) or 0508 123108(New Zealand) to connect you to the nearest authorised service centre BGM604 BGM604-F BDGM604 BDGM604-F...
- Page 2 Preface Thank you for choosing the bellini gas cooktop. To use this appliance correctly and prevent any potential risk, read these instructions before using the appliance. If you are unsure of any of the information contained in these instructions, please contact our...
-
Page 3: Table Of Contents
contents Preface Safety Warning Safety Instructions Installation Child and People Safety During Use Cleaning and Service Environmental Information Instructions for use and maintenance Description of the appliance How to Use the appliance Safety and Energy saving advice Cleaning and Maintenance Technical instructions Using instructions Positioning... -
Page 4: Safety Instructions
safety instructions Please take the time to read this Instruction Manual before installing or using the appliance. If the appliance is sold or transferred to another person, ensure the booklet is passed on to the new user. accident caused by misuse in advance, and use the appliance more conveniently. Neglect of this mark may result in severe personal injury or Danger/Warning death. -
Page 5: Installation
installation Warning accordance with regulations in force gas and electrical supply complies and only used in a well ventilated with the type stated on the rating space. plate. marine craft or in caravans, it should not must be installed in such a way that be used as a space heater. -
Page 6: Child And People Safety
child and people safety Warning The appliance gets hot when it is in use. Children should be kept away until it has cooled. Caution from using the appliance safety without supervision or instruction by a responsible person to ensure that they can use the appliance safety. -
Page 7: During Use
during use Warning Burner panel is not designed to operate food. from an external timer or separate remote control system. comes The use of a gas cooking appliance results in the production of heat and moisture in contact with water. Do not operate the room in which it is installed. - Page 8 during use materials in the storage drawer aerosols may be affected by heat and should not stored above or below the near this appliance. appliance. this appliance while it is in operaiton. ‘ ’ position when not in use. Caution industrial purposes.
-
Page 9: Cleaning And Service
cleaning and service Warning cleaning agents. repaired or serviced by an authorised technician Service and only genuine approved spare parts should be used. Caution and cooled. clean the appliance. environmental information with due regard to safety and the environment. unusable, by cutting off the cable. disposed with other household wastes at the end of its working life. -
Page 10: Description Of The Appliance
Model BGM604/BGM604-F Pan Support Cast Iron Wok pan Suppo r Top Plate S tainless Steel Di m m ension(W*D*H ) 590*500*95 Ignition device Conti n n uous Ignition T y Gas Connectio n G1/2 thread Electric supply... -
Page 11: How To Use The Appliance
Test Point Adaptor(1) I nj ector ( 4 ) Gas-pipe bend( ) 1 Bellini Instruction Manual(1) how to use the appliance The following symbols show on the control panel, next to each control knob: Black circle: gas off Large flame: maximum setting Small flame: minimum setting knob. - Page 12 how to use the appliance Automatic ignition with flame failure safety device To ignite a burner: o Press in the control knob of the burner that you wish to light and turn it anti-clockwise to the maximum position. o If you keep the control knob depressed, the automatic ignition for the burner will operate.
-
Page 13: Safety And Energy Saving Advice
safety and energy saving advice - The diameter of the bottom of the pan should correspond to that of the burner. BURNERS of the 200mm 240mm burner. Semi-Rapid 160mm 160mm 120mm lid half off one side. them that they increase the temperature in this area and may cause damage. -
Page 14: Cleaning And Maintenance
cleaning and maintenance completely Metal Brush Nylon Brush Soft cloth Detergent Neutral Detergent knobs knobs water. For stubbon soiling, soak beforehand. wrung-out the risk of corrosion. normal because of the high temperatures. Each time the appliance is used these parts should be cleaned with a product that is suitable for stainless steel. - Page 15 cleaning and maintenance from the top plate. detergent or washing up liquid cloth and wipe dry with a clean cloth. blocked. 1 2 3 spreader into their respective recesses.
-
Page 16: Using Instructions
using instructions Warnings Grease cranes produced at the factory to meet the requirement of all life hob. -
Page 17: Positioning
600mm BGM604/ BGM604-F 700mm BDGM604/ BDGM604-F 400mm 400mm FO 0813 o The edges of the hob must be a minimum distance of mm from a side or rear wall. o 700 mm between the highest point of the hob surface (including the burners) and the underside of any horizontal surface directly above it. -
Page 18: Installing The Appliance
3. Do not leave a gap in the Self Adhesive strip or overlap the thickness. Bottom view BGM604/ BGM604-F The thickness of the Self Adhesive strip is The width of the Self Adhesive strip is 10 mm. BDGM604/ BDGM604-F The thickness of the Self Adhesive strip is 3 mm. -
Page 19: Gas Connection
gas connection Statutory requirements This installation must conform with the following: ■ Manufacturer’s Installation instructions ■ Local Gas Fitting Regulations ■ Municipal Building Codes ■ Refer to AS/NZS 5601.1 for Gas Installations ■ S.A.A. Wiring Code ■ Local Electrical Regulations ■... - Page 20 connection ■ Flexible Ho se: If installing with a hose a ssembly, it mu st comply with AS/NZS 1869, 10 m m ID, class B or D, no mo ore than 1 long and ins talled in accordance with AS/NZS 5601.1.
-
Page 21: Gas Specifition
gas specification Heat input and orifice size marked(mm) Gas type & Electrical Model No. Total Heat input pressure power Work burner Auxiliary- rapid Rapid burner Semi-rapid 12.96 MJ/h 6.3 MJ/h 3.6 MJ/h 29.16 MJ/h 0.97 0.72 0.53 2.75kPa 240V~ 50/60Hz B DGM604/B DGM604-F Natural Gas 1.60... -
Page 22: Electrical Connection
electrical connection - Green/yellow = Earth - Blue = Neutral - Brown = Live Switch 1 Switch 2 AC INPUT Switch 3 Switch 4 IGNITION When the power cord is damaged it must be replaced by the manufacturer to produce, customer service agent or similarly qualified personnel. - Page 23 gas adustment injector in place. Injector Adjustme n n t of minimum l e e vel of the flam e e Tu u rn the taps down to minimum R R emove the knob from the tap and place a small bladed screwdriver in the centre of the tap shaft.
-
Page 24: Troubleshooting
trouble shooting Repairs should be performed by a licensed technician only. Improper repair may result in considerable danger to you and others. No Spark. Check the electricity supply Not ignited The gas supply is closed. The gas supply is not completely Badly ignited open. - Page 25 Email admin@gsmsales.com.au; Australia 1300 373 199 or New Zealand 0508 123 108. t w o ( 2 )
- Page 26 1.10 If you are required to transport the Bellini product to the Company or its service agent, you must ensure it is safely disconnected by a qualified tradesman and securely packed and insured. The Company does not accept any responsibility for loss or damage of the Bellini product prior to it being received by the Company or its service agent.
Need help?
Do you have a question about the BGM604 and is the answer not in the manual?
Questions and answers