Table of Contents
Advertisement
CONTENTS & INTRODUCTION
BEFORE USING THE HOB
Make sure that you have removed all
packaging, wrappings, stickers and films
from the hob surface.
It is recommended that you clean and
wash the hob surface before using for the
first time.
Apply a thin coat of ceramic hob cleaner
to the hob to help maintain and protect it.
Important Notice
Please note there may be a cooling fan
fitted to this appliance. It is an integral
part of its safety and functionality. When
the appliance is installed care must be
taken that the cooling fans performance
is not impeded by any objects coming
into contact with it. (Installation pipes,
leads etc) Care must also be taken that
there is sufficient air flow at the rear of
the appliance for the cooling fan to run at
its optimum efficiency, (particularly built
in appliances) see clearance dimensions
in the installation section of the booklet.
During use the appliance must never be
disconnected from the mains supply as
this will seriously affect the safety and
performance of the appliance, particularly
in relation to surface temperatures
becoming hot and gas operated parts
not working efficiently. The cooling fan is
designed to run on after the control knob
has been switched off to keep the front of
the appliance and the controls cool until
the appliance has naturally cooled itself.
Advertisement
Table of Contents
