Table of Contents
Advertisement
Special Function Key
Touch once for Function 1
42
C - Ideal for melting or
o
sauces
Touch twice for Function 2
70
C - Ideal for keeping warm
o
Touch three times for Function 3
94
C - Ideal for a Rapid Simmer-
o
ing.
Pan detection
When a zone has been activated but no
pan has been placed on the cook zone,
the zone will recognise that there is no
pan in position. It also means the hob
only uses power when a suitable pan is
placed on the zone. This reduces the en-
ergy used during the cooking process, i.e.
when you take your pan off the zone the
hob automatically reduces the power, and
only switches back on when you replace
the pan.
Note If the
symbol does not disap-
pear when a pan is placed on the zone it
indicates that the pan is not suitable for
induction cooking.
SPECIAL HOB FUNCTIONS
On/Off switch
The central on/off switch enables all of
the cooking zones to be switched on/off
simultaneously at a touch of a button, so
when you have finished cooking or are
called away from the kitchen for any rea-
son you can be safe in the knowledge that
everything is under control and safe.
To Operate
1) Select the on/off key. The key needs to
be pressed for at least 1 second to acti-
vate, this is to ensure that the hob cannot
be activated unintentionally.
USING THE HOB
Note:
All other keys only need to be pressed for
0.3 seconds to be activated/deactivated.
Note:
"H" will appear on any cook zone display
that is still hot to touch.
Using the Timer
All timers work as count down timers. The
operation range is between 1 min to 2h
59min. For times less than 59mins, the
display is exact to the second.
Before activating a timer the control has
to be switched on. Switching the con-
trol off deactivates cooking zone related
timers. The egg timer stays active after
switching the control off.
A symbol next to the zone will be lit when
a timer is set to that zone
Activating Cooking Zone Timer
To activate the timer, press both the plus
(+) and minus (-) keys together.
A timer can be activated for each active
cooking zone. After selecting the timer the
cooking zone related luminous symbol is
fully lit and the timer display shows 0.00.
For the following 10 sec it is now pos-
sible to assign a timer value to the active
cooking zone. After 10sec without input,
the timer function is deactivated and the
The timer has up to
7 timers. 6 timers to
be assigned to the
cooking zones and
one independent
timer called egg-
timer.
min
The displays show
the remaining time
until the alarm is
activated.
6.220
Advertisement
Table of Contents
