Table of Contents
Advertisement
INSTALLATIONS
1. Remove the Mounting Bracket from the monitor by
removing the four monitor fixing screws.
2. Place the mounting bracket on the position to be
installed in the vehicle, and secure it with the four bolts
(procured locally ø6 mm).
3. Place the monitor onto the bracket and tighten with the
four monitor fixing screws.
4. Install the GP-Q48 monitor hood (option) by tightening
the two screws supplied, if required.
6
5. Connect the remote cable to the REMOTE/CAMERA
Remove screws
connector on the rear of the monitor.
The remote cable is designated as shown in the figure
below.
To Rearview Monitor
q +12 V DC (red)
w Remote In (blue)
e Not Used
r Ground (green)
t Audio In (white)
y Video In (yellow)
u Ground (green)
i Camera Ground (black)
o +9 V DC (red)
To Rearview Camera
q Audio In (white)
w Video In (yellow)
e Camera Ground (black)
r +9 V DC (red)
Connect
Remote
Cable
w
q
r
e
1
2
3
4
5
6
7
8
9
Hide quick links:
Advertisement
Table of Contents
