Attaching The Carabiner Clip; Optional Maps; Data Fields - Garmin Oregon 650 Owner's Manual

• Go to www.garmin.com/learningcenter.
• Go to http://buy.garmin.com, or contact
your Garmin dealer for information about
optional accessories and replacement
parts.
Appendix

Attaching the Carabiner Clip

1 Position the carabiner clip
on the mounting spine
➋
2 Slide the carabiner clip up until it locks
in place.
Removing the Carabiner Clip
Lift up on the bottom of the carabiner
clip, and slide the carabiner clip off the
mounting spine.
Oregon 650 Owner's Manual

Optional Maps

You can use additional maps with the
device, such as BirdsEye satellite imagery,
BlueChart g2, and City Navigator detailed
maps. Detailed maps may contain additional
points of interest, such as restaurants or
marine services. For more information, go to
http://buy.garmin.com or contact your Garmin
dealer.
in the slots
➊
tempe
of the device.
The tempe is an ANT+ wireless temperature
sensor. You can attach the sensor to a secure
strap or loop where it is exposed to ambient
air, and therefore, provides a consistent
source of accurate temperature data. You
must pair the tempe with your device to
display temperature data from the tempe.

Data Fields

Some data fields require you to be navigating
or require ANT+ accessories to display data.
24hr Max Temperature: The maximum
temperature recorded in the last 24 hours.
24hr Min Temperature: The minimum
temperature recorded in the last 24 hours.
EN
43