GARMIN OREGON QUICK GUIDE Turning the GPS device On and O 1- to turn on the device, press the Power Key 2- to turn o the device, press and hold the Power Key Battery Information This device uses two AA batteries. You will be provided with a set of batteries.
Page 2
Before starting your ride please reset all data in the GPS device. This will bring the trip com- puter back to zero. To reset the data: 2- Touch “Reset” 1- Touch “Setup” 3- Touch “Reset 4- Con rm by Trip Data, etc” touching “Yes”...
Page 3
You can view the track in three di erent ways while riding. We advise to use the Automotive Mode. To change the view of the track: 1- Touch “Setup” 2- Touch “Map” 3- Touch “Orientation” 4- Touch “Automotive Mode”...
Page 4
Starting your ride Your customized routes will be preloaded onto the GPS as tracks. To choose one track to be followed: 1- Touch “Where To” 2- Touch “Tracks” 3- Choose the 4- Touch “Go” name of the track...
Page 5
Mark a Waypoint You may want to store your current location to be able to nd it back later again. 1- Touch “Mark Waypoint” 2- Touch “Save and Edit” 3- Touch “Change Name” 4- Enter name and touch the green check-mark...
Page 6
If you are riding a track and you want to get back to your hotel the shortest way: 1- Touch “Where To” 2- Touch “Stop navigation” 4- Touch “Waypoint” 3- Touch “Where To” again 5- Choose your hotel 6- Touch “Go”...
Page 7
These are the most common functions of the Garmin Oregon used by us riders. You can nd the full user's manual in our website. Good to know: 1- This GPS device needs to connect with several satellites before nding it's actual location. It may take a few minutes from the moment you switch it on until it is ready to go.