Brother MFC-5490CN Quick Setup Manual page 2

2
Load plain A4 paper
a
Pull the paper tray
machine.
b
Open the paper tray cover a.
1
c
With both hands, gently press and slide the
paper side guides
guide to fit the paper size.
b
Make sure that the triangular marks
paper side guides
line up with the mark for the paper size you are
using.
2
completely out of the
a
1
and then the paper length
a
on the
c
and paper length guide
a
1
3
2
3
d
Fan the stack of paper well to avoid paper jams
and misfeeds.
e
Gently put the paper into the paper tray print
side down and top edge first. Check that the
paper is flat in the tray.
Important
Do not push the paper in too far.
f
Gently adjust the paper side guides to the
paper with both hands. Make sure that the
paper side guides touch the edges of the
paper.
g
Close the paper tray cover. Check that the
paper is flat in the tray and below the maximum
paper mark a.
b
h
Slowly push the paper tray completely into the
machine.
1