Set Your Country (For Australia / New Zealand Customer Only) - Brother MFC-5490CN Quick Setup Manual

Important
The telephone line cord MUST be connected
to the socket on the machine marked LINE.
Note
If you are sharing one telephone line with an
external telephone, connect it as shown below.
1 Extension telephone
2 External telephone
Note
If you are sharing one telephone line with an
external telephone answering machine, connect it
as shown below.
Set the receive mode to External TAD if
you have an external answering machine.
See Choose a Receive Mode on page 8.
For additional details, see Connecting an
external TAD (telephone answering device)
in Chapter 7 of the User's Guide.
4
1
2
(Example for Australia)
(Example for Australia)
4
Set Your Country
(For Australia / New
Zealand Customer Only)
You must set your country so that the machine works
correctly on local telecommunication lines in each
country.
a
Check that the power is turned on by
connecting the power cord.
Press OK.
Set Country
Press OK Key
b
Press a or b to select the country
(Australia or New zealand).
Select a b & OK
Australia
c
Press OK when the LCD shows your country.
d
The LCD prompts you to make sure of the
country again.
Australia?
1.Yes 2.No
e
If the LCD shows the correct country, press 1
(Yes) on the dial pad and go to the next step.
Or press 2 (No) on the dial pad and go back to
step b to choose the country again.
f
After the LCD shows Accepted for two
seconds, the machine will restart automatically.
After the restart, the LCD shows Please
Wait.
e