Overview Of The Leds - Sennheiser DW Office Instruction Manual

³
»
´
´
3

Overview of the LEDs

Base station
LED of the PC button ³
lights up
flashes
LED of the PHONE button »
lights up
¿
flashes
LINK LED ¿
lights up blue
lights up red
flashes red
is off
CHARGE STATUS LED ´
LED segment* Battery charge
1 0-25%
2 25-50%
3 50-75%
4 75-100%
* during charging, each segment gets brighter in 5 steps
When the LED segment 1 lights up weakly or flashes, the battery is
almost flat. You have to recharge the battery within the next few
minutes (see page 22).
Headset
HEADSET LED
lights up blue
flashes blue slowly
flashes red
is off
flashes blue/red
³
Meaning
PC mode
Incoming PC call
Meaning
Phone mode
Incoming telephone call
Meaning
Active link to the headset
No link to the headset
Headset is muted
Standby mode
Base station is switched off (not powered)
Required charging time
approx. 10 min
approx. 10 min
approx. 20 min
approx. 20 min
Meaning
Charging mode
Active link to base station
Rechargeable battery is almost flat
Standby mode
Headset is switched off
Setting mode/GAP pairing mode
Pairing of an additional headset to the
base station
Overview of the LEDs
total:
approx.
60 min
9