Page 1
MATERIALS USED FOR THEIR PRODUCTION IS GUARANTEED AND CERTIFIED IN LABORATORIES ACCORDING TO EN STAN- DARDS. INSTRUCTION MANUAL FOR USE OF BABY STROLLER “LUMIX” LUMIX PLEASE, READ CAREFULLY THESE INSTRUCTIONS AND KEEP THEM IN A SAFE PLACE FOR FUTURE REFERENCE! THIS...
This stroller is suitable for use for babies aged 0+ months, weighing up to 15 kg. The stroller is equipped with a 5-point safety harness to assure your child’s safety. The backrest, leg rest and canopy can be adjusted according to baby’s needs. The seat unit may be mounted in both directions –...
Page 3
15. The back rest must be adjusted by an adult only! Do not adjust the back rest while the child is in the stroller! 16. The seat/cot can be installed in two directions - mother facing (opposite motion direction) and motion direction. Always make sure the seat is well fixed to the frame after changing its direction.
ASSEMBLY AND FUNCTIONS This stroller is supplied disassembled by the producer. You should follow the given instruc- tions during the assembly. After the fixing you should hear a click. Always check if the connec- tions are stable after every fixing and make sure you have followed the given instructions! WARNING! Keep children under 3 years of age away during assembly in order to prevent injury.
To install front wheels, insert front wheel set peg into the plastic base until you hear a “Click” – fig.2-1. To disassemble: Press down the button on the plastic base and pull the wheel set out – fig. 2-2. The front wheels can move straight forward or swivel at 360°. When you press down the latches (fig.
CANOPY Align the canopy plastic pegs with the slots on seat sides, press tightly to insert the pegs fig. 6 into the slots – fig. 6. ATTENTION! After the canopy is mounted, it can’t be removed. SEAT UNIT Seat unit is reversible and can be installed in forward or face-to-face position! To assemble the seat unit, align seat pegs with the holes on frame, insert into until it clicks...
Page 8
LEG REST The leg rest can be adjusted in 3 positions. To adjust leg rest: Press down both round buttons to adjust leg rest – fig. 9. fig. 9 BACK REST Hold the plastic key with your fingers as shown in fig. 10, to adjust the position in one of the three recline positions.
SAFETY HARNESS To use restraint system fig. 12: To unlock buckle, press in on center button and pull harness out from each side. To lock buckle, push each side of harness back into buckle until each clicks in place. fig. 12 HANDLE HEIGHT ADJUSTMENT Press down the button on handle centre to adjust its height –...
Page 10
AIR WHEELS RECOMMENDATIONS 15-1 15-2 15-3 15-4 fig. 15 You must check the air wheels before each use of the stroller. The proper maintenance and pressure is important for their use. The optimal pressure of the wheels should not exceed 195 kPa! Pick out the tube head from the big side (fig.15-1, fig.15-2) and fix it to the other side fig.15-3.
Page 11
INSTRUCTION FOR INSTALL OF CAR SEAT “LUMINA” ON STROLLER “LUMIX” 1. Insert the car seat adaptor into the receptor of the stroller. You must hear a click sound in order to be sure that car seat adaptor and connector are secured (fig. 16).
CARE AND MAINTENANCE 1. Periodically check all locking mechanisms, brakes, belts and buckles, joints and fixing mechanisms, as well as wheels to make sure that they function properly and are not damaged or worn out. 2. Should you find any damaged parts, discontinue the use until the problem is fixed! 3.
Need help?
Do you have a question about the LUMIX and is the answer not in the manual?
Questions and answers