Press [Finish] to complete driver installation.
Installation under Windows 2000
To install the recorder card under Windows 2000, first open the Control Panel under [Start / Settings /
Control Panel]. Then open the Hardware Wizard under [System / Hardware / Hardware Wizard].
The drivers are on the software CD under
[CDROM]:\DigiProtect xxxx Server\DRIVERS (e.g.: E:\DigiProtect 900 Server\DRIVERS).
The new hardware is now searched for. When installing the drivers, make a link to the above-named
directory. Install all drivers and complete the installation correctly.
Camera connection
The pin assignment of the video inputs (BNC) is done either via the cable supplied or directly via the
BNC video inputs on the recorder card. Now connect your video signals to the recorder card.
65