Programming The Digiprotect System; Standard Settings - Digi-Protect TV8800 User Manual

Programming the DigiProtect system

Via [Setup] in the live screen, you open the configuration menu of the digital surveillance system. You
can save your settings by clicking [Save]. Click [Apply] to save your settings and exit Setup. In Setup,
you can set the following functions:

Standard settings

Voice
Voice
One channel is provided for recording audio data. The built-in sound card of the PC is used as input.
Click here to activate audio input (voice recording). Select between microphone (MIC) or line-in
(LINE).
Monitor out
The video card of the digital surveillance system has a socket for connecting an external monitor
(Chinch connector next to the camera inputs). You can select channels for display on the external
monitor by clicking [Monitor out Select] (not Model TV8809, TV8810, TV8811). The display mode in
the surveillance system (single-picture, multi-channel display) is used for the external connection. In
the case of single-picture display, the channels can be shown in sequence. You can define the display
time (dwell time) of each channel by entering the time in seconds.
Monitor out Select
Setting summer
time
Auto System reset
DX-settings
70
Add Printer
Time Setup
Disk Manager
Compression
settings
Password
Set Channel
Power Down
mode
Save/Apply