Operating The Digital Surveillance System; Controlling Dome (Ptz) Cameras - Digi-Protect TV8800 User Manual

Operating the digital surveillance system

Controlling dome (PTZ) cameras

To open the dome control tab, click [PAN/TILT] in the live
screen.
With the digital surveillance system, you can control a large
number of PTZ (dome) cameras. You first have to configure
a connected PTZ camera on the [Setup/PAN/TILT] tab.
Speed
The pan and tilt speeds can be adjusted according to
requirements.
Zoom/Focus
You can zoom and focus the camera manually with the [+]
and [–] buttons.
Control
This contains the direction control buttons. At the centre is
an autofocus button (not active for all cameras).
Setup Preset
Under [Preset], you can save and retrieve
camera positions. Up to 64 preset positions
can be saved for each camera channel.
Select a number from the Preset list and name
this position under [ID]. Now move the camera
to the desired position and then click [Save
ID]. Remove a preset with [Delete Preset].
Delete Preset
86
Speed
Exit
Settings
Zoom/Focus
Control
Camera no.
Preset list
Go to preset
Name/ID
Save ID
Set Preset