Sending An Automatic E-Mail; Message Function - Digi-Protect TV8800 User Manual

Sending an automatic e-mail

This function automatically sends an e-mail in the event of motion detection or an alarm. The content
of the e-mail is an AVI sequence of any length. The length is defined by the entry under [Post-
detection] in seconds, and the frequency by the entry in the field behind. Enter a start and end time to
restrict the period of this function (e.g., 22:00 – 07:00).
Click [Setup E-Mail] to make settings for the send process. Enter the address of your mail server, your
own address and the destination address.

Message function

This function permits the sending of network messages to
connected network users. Enable a message and select a
connected user. Click [Send] to send the message.
Length
Frequency
Period
Camera selection
SMTP server
Sender's address
Recipient's
address
90