Recording - Digi-Protect TV8800 User Manual

Recording

Video signal Auto Camera
Search
Video signal
You can show or hide a connected camera on the live screen. Although an installed but hidden
camera is not shown in the live view, it is recorded with the corresponding setting. Left-click a channel
field to switch between options.
Name
You can give each camera input a name. This camera name is shown in the video picture and saved
with it. You can enter the name via a normal keyboard or the on-screen keyboard.
Recording type
The following recording types are available:
• Record:
• Motion:
• Sensor:
Name
Event
setup
[continuous recording] The video data is recorded continuously.
[motion-triggered recording] Recording is triggered by motion sensors
of the respective channel. You can configure the sensors under
[Setup / Motion]. They react to changes in the video picture (or parts
thereof).
[recording triggered by alarm sensor] Recording is controlled via max.
16 alarm inputs. The input connections are on a separate sensor
74
Recording Alarm event
type
Channel no.
Alarm
Control
Pre/post-
recording
Frame
rate
Record
Motion/Sen
sor Event