Motion; Color Control - Digi-Protect TV8800 User Manual

Motion

For motion-triggered recording, the motion sensors for the different cameras have to be configured.
Select a camera and mark the areas in the camera window to be monitored. With the Sensitivity slider,
you define how big the changes in the video picture have to be to trigger motion detection. Click
[Delete] to delete a marked area.
Enable [Beep for Motion] for an acoustic signal and [Show Motion Area] for an optical marking if
motion is detected. Select [To the maximum quality after Motion/Sensor] for recording at maximum
frame rate following an event.
Camera no.

Color Control

Here you can set the brightness, saturation, contrast and hue of the channels. If you click [Setup
User's Default], the settings for this channel are used. [Cancel User's Default] resets all settings to the
default system values. [All Default Color] sets the values of all channels to the user settings. [Default
Color] sets the settings to the user definitions.
Functions on movement
78
Marking of
sensor area
Sensitivity
Delete/Clear