Installing The Alarm I/O Card - Digi-Protect TV8800 User Manual

Installing the alarm I/O card

The I/O card (optional, Art. No. TV8812) enables you to connect up to 16 sensors to the surveillance
system. The I/O card also has 8 relay outputs for connecting external equipment. The I/O card needs
2 PCI sockets in your PC.
1
2
Switch the PC off and pull the mains plug out. Open the PC cabinet. Connect the sensor card with the
alarm card via connectors 2 and 3. Use the short flat cable provided. Connect the recorder card to the
sensor card (connector 1) using the second flat cable. Now plug the sensor card into a free PCI socket
and the alarm card into any free socket. Please use the provided power connector to connect the
sensor card with the power supply of the PC. Close the PC cabinet and switch the PC on.
The pin connections of the alarm and sensor cards is shown on the alarm card.
Alarm card
NO8
COM8
NO7
COM7
NO6
COM6
NO5
COM5
NO4
COM4
NC4
NO3
COM3
NC3
NO2
COM2
NC2
NO1
COM1
NC1
Sensor card
Sensor
Alarm card:
card
Up to 8 outputs (24V DC, 1A) can be connected;
GND
1-4 can be switched to NO (Normally Open) and
GND
NC (Normally Closed) and 5-8 only to NO.
GND
GND
Sensor card:
16
You can connect 16 sensor inputs to the system.
15
The pin contacts can be set to NO or NC in the
14
Server software setup.
13
12
11
10
09
08
07
06
05
04
03
02
01
3
Alarm card
102