Control User Access - Digi-Protect TV8800 User Manual

You also have to set the communication parameters between the system and the dome camera
correctly (COM port no. on system, speed, data bits, parity).
User settings
If your dome camera is not on the model list, you can enter the specific control commands here (hex
code).
Master Controller
Here you can integrate a separate camera master controlled into the system. Select the model from
the list, set the communication parameters, and activate the device.

Control User Access

You can have remote access to the digital surveillance system via a network. The system then works
as a server. A user accessing this server is called a client.
TCP/IP
To enable remote access, click [TCP/IP].
Check IP
The server IP is defined either automatically or manually.
Port
Define the network port here. The default setting is Port 2000. The server and client port numbers
must be identical.
User DDNS-Server
80
Check IP
Port
Transmission
speed
Image quality
Client-List
Web-Server
Voice
communic.
Setup TCP/IP
Emergency
IP-Server