Installing Hardware And Software; System Requirements; Installing The Video Card In The Pc - Digi-Protect TV8800 User Manual

Installing hardware and software

System requirements

Operating system: Windows XP, 2000
Hard disk: Min. 200 GB for accident prevention certification
Mainboard: Mainboard with intel chipset 915... or 865G...
VGA: Radeon 9600 AGP, Radeon X550 PCIx
Number of drivers required and special hardware requirements:
Card Type SW-
Typ
TV8800, DF1000
TV8801, DF1000
TV8802 DF900
TV8803, DF1500
TV8804
TV8805, DF2400
TV8806,
TV8807
TV8809, DF9000
TV8810
TV8811 DF9400

Installing the video card in the PC

1. Switch the PC off and pull the mains plug out. Open the PC and insert the DigiProtect card in a
free PCI socket. You may have to remove the blank on the rear of the PC. Fix the card using the
screws provided. Connect the watchdog cable correctly to the recorder card and the PC (PC reset
switch).
2. Close the PC cabinet and switch on the PC. Windows starts hardware recognition and detects the
newly fitted DigiProtect card.
IMPORTANT: Install the hardware and drivers before the software.
Hardware requirements
Celeron, 1.0GHz, 256 MB
RAM, 40 GB HDD
Celeron, 1.7GHz, 256 MB
RAM, 120 GB HDD
Celeron, 1.7GHz, 256 MB
RAM, 120 GB HDD
Pentium 4, 2.4GHz, 256 MB
DDR-RAM, 200 GB HDD
Pentium 4, 2.4GHz, 512 MB
DDR-RAM, 200 GB HDD
Driver
1 x Video
1 x Audio
2 x Video
2 x Audio
4 x Video
4 x Audio
1 Driver
1 Driver
Alarm/sensor cable
Watchdog
63
Driver name
NanoBT
NanoBT
NanoBT
ALogics Ruby3
ALogics Ruby3