Fax - Brother DCP-1600 User Manual

Chapter 1

2.Fax

2.Fax (For MFC-1900, MFC-1901 and MFC-1905)
Level 2 Level 3
1.Setup 1.Ring Delay
Receive
(In FAX mode
only)
2.F/T Ring
Time
3.Fax Detect
The factory settings are shown in Bold with an asterisk.
20
Descriptions 1 Options
The Ring Delay
(02 - 10)
setting sets the
02*
number of times the
machine rings before (Example for
it answers in Fax Australia)
Only and Fax/Tel
modes.
Sets the length of the
20 Secs
fast double-ring time
30 Secs*
in Fax/Tel mode.
40 Secs
70 Secs
(For New Zealand)
20 Secs
30 Secs*
40 Secs
55 Secs
Receives fax
On*
messages without
pressing Start. When
Fax Detect is On, you
can receive fax
messages without
pressing Start.
Semi (MFC-1905)
Off
Descriptions 2 Page
If you have external 72
or extension
telephones on the
same line as the
machine, choose the
maximum number of
rings.
If the call is a fax, 72
then your machine
will receive it;
however, if it is a
voice call the
machine will sound
the F/T ring (a fast
double-ring) for the
time you have set in
the F/T Ring Time
setting. If you hear
the F/T ring it means
that you have a voice
caller on the line.
The machine can 72
receive a fax
automatically, even if
you answer the call.
The machine will only
receive a fax call
automatically if you
answered it using the
machine's handset.
If you are at the
machine and answer
a fax call first by lifting
the handset of an
external telephone
(For MFC-1900 and
MFC-1901) or the
machine (For MFC-
1905), press Start.
1