Brother DCP-1600 User Manual page 24

1.General Setup (For MFC-1900, MFC-1901 and MFC-1905) (continued)
Level 2 Level 3
4.Ecology 1.Toner Save
—
5.LCD
Contrast
—
6.Scan Size
—
7.Replace
Toner
The factory settings are shown in Bold with an asterisk.
Descriptions 1 Options
You can save toner
On
using this feature.
Off*
Adjusts the contrast
-nnnno+
of the LCD.
-nnnon+
-nnonn+*
-nonnn+
-onnnn+
Adjusts the scan area
A4*
to the size of the
Letter
document.
(For Philippines:
Letter*)
Sets the machine to
Continue
continue or stop
printing after the LCD
shows Replace
Toner.
Stop*
General information
Descriptions 2 Page
Increases the page
yield of the toner
cartridge. When you
set Toner Save to
On, print appears
lighter.
Press c to make the
LCD darker. Or press
d to make the LCD
lighter.
The machine will 63
continue printing.
Replace the toner
cartridge with a new
one after the LCD
shows Toner
Ended.
The machine will stop
printing. Replace the
toner cartridge with a
new one.
1
17