Brother DCP-1600 User Manual page 21

Chapter 1
0.Initial Setup (For MFC-1910W, MFC-1911NW and MFC-1916NW)
Level 2 Level 3
1.Date&Time 1.Date&Time
2.Daylight
Save
3.Time Zone
—
2.Station ID
—
3.Tone/Pulse
(not available in
New Zealand)
The factory settings are shown in Bold with an asterisk.
14
Descriptions 1 Options
Puts the date and
Year:
time on the LCD and
in headings of faxes
you send if you set up
the station ID.
Month:
Day:
Time:
Set the machine to
On
change for Daylight
Saving Time.
Off
Sets the time zone for
UTCXXX:XX
your country.
Sets up your name
Fax:
and fax number to
appear on each page
you fax.
Tel:
Name:
Chooses the dialling
Tone*
mode.
Pulse
Descriptions 2 Page
Enter the last two
digits of the year.
(e.g. Enter 1, 3 for
2013.)
Enter the two digits
for the month. (e.g.
Enter 0, 1 for
January.)
Enter the two digits
for the day. (e.g.
Enter 0, 1 for 1st.)
Enter the time in 24-
hour format. (e.g.
Enter 1, 5, 2, 5 for
15:25.)
It will reset the time
forward one hour.
It will reset the time
backward one hour.
Enter your fax
number (up to 20
digits).
Enter your telephone
number (up to 20
digits). If your
telephone number
and fax number are
the same, enter the
same number again.
Enter your name (up 61
to 20 characters).
Your machine comes
set for Tone dialling
service.
If you have Pulse
dialling service
(rotary), you need to
change the dialling
mode.