Error And Maintenance Messages - Brother DCP-1600 User Manual

Hide thumbs Also See for DCP-1600:
Table of Contents

Advertisement

Error and maintenance messages

The most common error and maintenance messages are shown below.
If you need more help, the Brother Solutions Center offers the latest FAQs and troubleshooting
tips:
Visit us at http://support.brother.com.
Error Message
Cartridge Error
Put the Toner
Cartridge back
in.
Comm.Error
Disconnected
Document Jam
(For ADF models)
Out of Memory
Cause
The toner cartridge is not
installed correctly.
Verify you are using a Brother
toner cartridge.
Poor telephone line quality
caused a communication error.
The other person or other
person's fax machine stopped
the call.
The document was not
inserted or fed correctly, or the
document scanned from the
ADF was too long.
The machine's memory is full.
Troubleshooting and other information
Action
Put the toner cartridge firmly into the drum unit,
and then put is back in the machine.
Use only a Brother Original drum unit and
Brother Original toner cartridge.
Try sending the fax again.
Try to send or receive again.
Pull the jammed paper out of the ADF unit.
Fax sending or copy operation in process
Do one of the following:
Press Start to send or copy the scanned
pages.
Press Stop/Exit and wait until the other
operations in progress finish, and then try
again.
Print operation in process
Press Stop/Exit. The machine will cancel
the print job and clear it from the memory.
Lower the print quality.
(For more information, see Software and
Network User's Guide.)
A
A
97

Advertisement

Table of Contents
loading

Table of Contents