Subscribe to Our Youtube Channel
Related Manuals for Keys Fitness Power System KPS-LEGM
Summary of Contents for Keys Fitness Power System KPS-LEGM
- Page 1 KPS-LEGM ACHINE Questions? Call our toll free Keys Fitness Helpline 1 - 8 0 0 - 6 8 3 - 1 2 3 6...
- Page 2 This manual will guide you through the assembly process. If at any time you are having trouble with the assembly or use of this product, then please contact us at our Keys Fitness Helpline. We have trained service technicians on site to take care of you, our valued customer.
-
Page 3: Before You Start
• This Power System unit should only be used on a level surface and is intended for indoor use only. Keys Fitness recommends an equipment mat be placed under the unit to protect the floor or carpet and for easier cleaning. -
Page 4: Front Frame
NOTE: Hand tighten bolts and nylon nuts until machine is fully assembled. STEP 1 Connect Front Frame (3) and Rear Base (2) to Main Frame (1) using: 4 x (19) Bolt 8 x (18) Washer 4 x (20) Nylon Lock Nut ASSEMBLY... - Page 5 NOTE: Hand tighten bolts and nylon nuts until machine is fully assembled. STEP 2 Connect Swing Tube (8) to Swing Arm as shown using: 2 x (23) Bronze Bushing 1 x (26) Washer 1 x (27) Washer 1 x (28) Bolt Slide Big Roller Pad (39) onto Swing Tube (8) and secure using: 1 x (37) Collar...
-
Page 6: Side Angle Frame
NOTE: Hand tighten bolts and nylon nuts until machine is fully assembled. STEP 3 Attach Right and Left Handles (11,12) using: 2 x (19) Bolt 2 x (20) Nylon Lock Nut STEP 4 Attach Side Angle Frame (4) using: 4 x (19) Bolt 4 x (20) Nylon Lock Nut STEP 5 Slide Stopper Prone (17) into Front Frame for range of motion... -
Page 7: Adjustable Roller Pad Frame
NOTE: Hand tighten bolts and nylon nuts until machine is fully assembled. STEP 6 Complete Adjustable Roller Pad Frame(10) as shown using: 2 x (43) Foam Pad 2 x (33) Big Plug Slide into frame and secure with Pop Pin. STEP 7 Slide Back Pad Adjustable Frame (9) into frame and secure with Pop Pin. -
Page 8: Adjustable Seat Bracket
NOTE: Hand tighten bolts and nylon nuts until machine is fully assembled. STEP 8 Attach Back Pad (16) using: 2 x (28) Bolt Connect Seat Pad (15) to Adjustable Seat Bracket (13) using: 4 x (28) Bolt Connect Adjustable Seat Bracket (13) to frame as shown using: 1 x (14) Shaft with Screw End 2 x (20) Nylon Lock Nut ASSEMBLY... -
Page 9: Table Of Contents
PARTS LIST DESCRIPTION main frame rear base front frame side angle frame leg frame circular plate w/shaft weight holder swing tube back pad adjustable frame adjustable roller pad frame left handle right handle adjustable seat bracket shalft with screw end seat pad back pad stopper prone... -
Page 10: Exploded View
EXPLODED VIEW... -
Page 11: Grip,
Product. To obtain warranty service, you must contact a Keys authorized retailer, service technician or Keys Fitness at our phone number located in this manual. Any parts determined to be defective must be returned to Keys to obtain warranty service. You must prepay any shipping charges, export taxes, custom duties and taxes, or any other charges associated with transportation of the parts or Product. - Page 12 Keys Fitness Products, L.P. 4009 Distribution Drive, Suite 250 Garland, Texas 75041 Customer Service: 1-800-683-1236...
Need help?
Do you have a question about the Power System KPS-LEGM and is the answer not in the manual?
Questions and answers