This manual will guide you through the assembly process. If at any time you are having trouble with the assembly or use of this product, then please contact us at our Keys Fitness Helpline. We have trained service technicians on site to take care of you, our valued customer.
• This Power System unit should only be used on a level surface and is intended for indoor use only. Keys Fitness recommends an equipment mat be placed under the unit to protect the floor or carpet and for easier cleaning.
Page 4
NOTE: Hand tighten bolts and nylon nuts until machine is fully assembled. STEP 1 Connect Seat Frame (3) to Rear Base (4) and Weight Support (1) using: 1 x (16) Bolt 2 x (18) Bolt 6 x (13) Washer 3 x (19) Nylon Nut ASSEMBLY...
Page 5
NOTE: Hand tighten bolts and nylon nuts until machine is fully assembled. STEP 2 Attach Pads (7,8) using: 1 x (11) Plastic Sleeve 1 x (1) Telescoping Arm Support 2 x (17) Bolt 2 x (15) Bolt 4 x (13) Washer Use Pop Pin (5) to select height of Arm Pad.
EXPLODED VIEW PARTS LIST Description Weight Support Telescoping Arm Support Seat Frame Rear Base POP Pin Bumper Seat Pad Arm Curl Pad Wheel Endcap 50.8 Plastic Sleeve 50.8x76.2x44.5x70 1 Knob M12*25 Washer 10 Bolt M10*30 Bolt M10*45 Bolt M10*90 Bolt M10*70 Bolt M10*100 Nylon Nut M10...
Page 7
Product. To obtain warranty service, you must contact a Keys authorized retailer, service technician or Keys Fitness at our phone number located in this manual. Any parts determined to be defective must be returned to Keys to obtain warranty service. You must prepay any shipping charges, export taxes, custom duties and taxes, or any other charges associated with transportation of the parts or Product.
Page 8
Keys Fitness Products, L.P. 4009 Distribution Drive, Suite 250 Garland, Texas 75041 Customer Service: 1-800-683-1236...