Keys Fitness Leg Press Attachment KPS-LP1 Owner's Manual
Keys Fitness Leg Press Attachment KPS-LP1 Owner's Manual

Keys Fitness Leg Press Attachment KPS-LP1 Owner's Manual

Keys fitness leg press attachment owner's manual

Advertisement

Quick Links

KPS-LP1
L
P
A
EG
RESS
TTACHMENT
Questions?
Call our toll free Keys Fitness Helpline
1 - 8 0 0 - 6 8 3 - 1 2 3 6

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Leg Press Attachment KPS-LP1 and is the answer not in the manual?

Questions and answers

Summary of Contents for Keys Fitness Leg Press Attachment KPS-LP1

  • Page 1 KPS-LP1 RESS TTACHMENT Questions? Call our toll free Keys Fitness Helpline 1 - 8 0 0 - 6 8 3 - 1 2 3 6...
  • Page 2 This manual will guide you through the assembly process. If at any time you are having trouble with the assembly or use of this product, then please contact us at our Keys Fitness Helpline. We have trained service technicians on site to take care of you, our valued customer.
  • Page 3: Before You Start

    ¡ ñ This Power System unit should only be used on a level surface and is intended for indoor use only. Keys Fitness recommends an equipment mat be placed under the unit to protect the floor or carpet and for easier cleaning.
  • Page 4: Main Frame

    NOTE: Hand tighten bolts and nylon nuts until machine is fully assembled. STEP 1 Connect Foot Plate Support (4) to Main Frame (1) using: (11) Pillow Block Bearing (26) Bolt (25) Washer (34) Nylon Lock Nut Attach Foot Plate (5) to Foot Plate Support (4) using: (20) Bronze Bushing (9) Foot Plate Shaft (33) Screws...
  • Page 5: Left Handle Bar

    Connect Cross Base (6) to Main Frame (1) using: 2 x (27) Bolt 4 x (24) Washer Connect Cross Base (6) to Home Gym using: 2 x (28) Bolt 2 x (35) Nylon Lock Nut Attach Right and Left Handle Bars (2,3) to Main Frame (1) using:...
  • Page 6: Back Pad Support

    NOTE: Hand tighten bolts and nylon nuts until machine is fully assembled. STEP 3 Insert Back Pad Support (7) into Main Frame (1). Attach Back Pad (16) to Back Pad Support (7) using: 2 x (31) Bolt Attach Seat Pad (23) to Main Frame (1) using: 2 x (27) Bolt ASSEMBLY 2 x (24) Washer...
  • Page 7: Leg Press Cable

    NOTE: Hand tighten bolts and nylon nuts until machine is fully assembled. STEP 4 Connect Leg Press Cable (8) as shown above using: 5 x (17) Pulley 10 x (24) Washer 1 x (30) Bolt ASSEMBLY 4 x (29) Bolt 5 x (35) Nylon Lock Nut...
  • Page 8: Table Of Contents

    PARTS LIST DESCRIPTION Main Frame Right Handle Bar Left Handle Bar Foot Plate Support Foot Plate Cross Base Back Pad Support Leg Press Cable Foot Plate Shaft Pop Pin (Lock) Pillow Block Bearing Plug 44.5 Plug 50.8x76.2 Plug 32 Grip Back Pad Pulley 4.5¡±...
  • Page 9: Exploded View

    EXPLODED VIEW...
  • Page 10: Grip,

    Product. To obtain warranty service, you must contact a Keys authorized retailer, service technician or Keys Fitness at our phone number located in this manual. Any parts determined to be defective must be returned to Keys to obtain warranty service. You must prepay any shipping charges, export taxes, custom duties and taxes, or any other charges associated with transportation of the parts or Product.
  • Page 12 Keys Fitness Products, L.P. 4009 Distribution Drive, Suite 250 Garland, Texas 75041 Customer Service: 1-800-683-1236...

Table of Contents