Keys Fitness Leverage Squat KPS-LS Owner's Manual
  1. Manuals
  2. Brands
  3. Keys Fitness Manuals
  4. Fitness Equipment
  5. Leverage Squat KPS-LS
  6. Owner's manual
Keys Fitness Leverage Squat KPS-LS Owner's Manual

Keys Fitness Leverage Squat KPS-LS Owner's Manual

Keys fitness leverage squat owner's manual
Hide thumbs
Table of Contents

Advertisement

Quick Links

KPS-LS
L
S
EVERAGE
QUAT
Questions?
Call our toll free Keys Fitness Helpline
1 - 8 0 0 - 6 8 3 - 1 2 3 6

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Leverage Squat KPS-LS and is the answer not in the manual?

Questions and answers

Related Manuals for Keys Fitness Leverage Squat KPS-LS

Summary of Contents for Keys Fitness Leverage Squat KPS-LS

  • Page 1 KPS-LS EVERAGE QUAT Questions? Call our toll free Keys Fitness Helpline 1 - 8 0 0 - 6 8 3 - 1 2 3 6...
  • Page 2 This manual will guide you through the assembly process. If at any time you are having trouble with the assembly or use of this product, then please contact us at our Keys Fitness Helpline. We have trained service technicians on site to take care of you, our valued customer.

  • Page 3: Before You Start

    • This Power System unit should only be used on a level surface and is intended for indoor use only. Keys Fitness recommends an equipment mat be placed under the unit to protect the floor or carpet and for easier cleaning.

  • Page 4: Main Upright

    ASSEMBLY NOTE: Hand tighten bolts and nylon nuts until machine is fully assembled. STEP 1 Connect Front Base (1) to Middle Base (2) with Bolts (34), Washers (31) and Nylon Lock Nuts (32). Connect Main Upright (3) to Middle Base (2) with Bolts (36), Washers (31) and Nylon Lock Nut (32).

  • Page 5: Angle Plate

    ASSEMBLY NOTE: Hand tighten bolts and nylon nuts until machine is fully assembled. STEP 2 Attach Angle Plate (4) to frame with Bolts (36) (35), Washers (31) and Nylon Lock Nuts (32). Connect Left (6) and Right (7) Legs to Main Upright with Bolts (35), Washers (31) and Nylon Lock Nuts (32).
  • Page 6 ASSEMBLY NOTE: Hand tighten bolts and nylon nuts until machine is fully assembled. STEP 3 Place Pillow Block Bearings (27) onto Main Arm (11) and secure to Main Upright with Bolts (30), Washers (28) and Nylon Lock Nuts(29).

  • Page 7: Slide Support

    NOTE: Hand tighten bolts and nylon nuts until machine is fully assembled. STEP 4 Complete Pin Handle assembly as shown below. Insert Slide Support (10) into Main Arm and secure with Pin Handle. ASSEMBLY...

  • Page 8: Olympic Adapter

    NOTE: Hand tighten bolts and nylon nuts until machine is fully assembled. STEP 5 Attach the Front (9) and Rear (8) Pads to the Main Arm as shown with Bolts (33) and Washers (31). Connect Olympic Adapters (12) to the Main Arm using Bolts (34), Washers (31) and Nylon Lock Nuts (32).

  • Page 9: Table Of Contents

    DESCRIPTION front base middle base main upright angle plate weight holder left leg right leg rear pad front pad slide support main arm olympic adapter pin handle link plate small grip nut plug spring grip plug 40*70 plug plug plug plug 25*50 bumper...

  • Page 10: Exploded View

    EXPLODED VIEW...

  • Page 11: Grip,

    Product. To obtain warranty service, you must contact a Keys authorized retailer, service technician or Keys Fitness at our phone number located in this manual. Any parts determined to be defective must be returned to Keys to obtain warranty service. You must prepay any shipping charges, export taxes, custom duties and taxes, or any other charges associated with transportation of the parts or Product.
  • Page 12 Keys Fitness Products, L.P. 4009 Distribution Drive, Suite 250 Garland, Texas 75041 Customer Service: 1-800-683-1236...

This manual is also suitable for:

Power system kps-ls

Table of Contents