Time Setting - Ganz ZC-PT Series User Manual

User's Manual
•
•
3.3.22

TIME SETTING

The time setting function is used to set the TIME related parameters of the integrated
high speed dome. Each item in the menu is listed as follows.
TIME DISPLAY
SET YEAR
SET MONTH
SET DAY
SET HOUR
SET MINUTE
EXIT+SAVE
•
47
H SIZE (00~80)
Users can adjust the horizontal size of a privacy mask through this item. Set
the H and V size to 0 can also delete the selected mask.
V SIZE (00~60)
Users can adjust the vertical size of a privacy mask through this item. Set the
H and V size to 0 can also delete the selected mask.
CLEAR MASK
Users can delete a preset mask zone with this item. Please follow the steps
listed below.
1. Select the mask zone that will be erased (e.g. 01).
2. Press <ENTER> to confirm the selection.
EXIT
Exit the PRIVACY MASK page and go back to the MAIN PAGE 3 to carry on
setup of time related setting.
MAIN PAGE 3
IR FUNCTION
ALARM SETTING
ALARM DETECT
WDR FUNCTION
PRIVACY MASK
TIME SETTING
SCHEDULE
EXIT OSD
TIME SETTING
OFF
05
10
02
12
12
YES
TIME DISPLAY
Select <ON> to display time information on the screen or <OFF> not to
display.
AUTO
ENTER
NONE
OFF
ENTER
ENTER
ENTER
YES