Table of Contents
Advertisement
OnLine Power
POWER RATING (KVA/KW)
INPUT and OUTPUT
INPUT VOLTAGE (VAC)
OUTPUT VOLTAGE (VAC)
OUTPUT FREQUENCY (Hz)
VOLTAGE REGULATION
OUTPUT WAVE FORM
EFFICIENCY
CREST FACTOR
SURGE PROTECTION
ISOLATION
NOISE ISOLATION
BATTERY
RECHARGE CURRENT
EXTERNAL BATTERY
BATTERY
BATTERY RUN TIME
BATTERY TYPE
NOMINAL BATTERY VOLTAGE
OVERCURRENT PROTECTION
PACKAGING
APPENDIX A - SPECIFICATIONS
Specifications for KVA, 0.8pf Units
10/8
Three Phase, 4-Wire plus Ground, 208Y/120 or 480Y/277 VAC (-20% to +15%)
The UPS will protect itself and the load against surges as defined in ANSI/IEEE C62.41 Categories A and B.
Provisions for hardwire connection of optional external battery cabinets or DC source.
192 VDC
15/12
20/16
25/20
Three Phase, 4-Wire plus Ground, 208Y/120 or 480Y/277 VAC
60 Hz +0.5 Hz
+/-3%, Regulated within CBEMA curve
Sine-Wave <5% THD.
Minimum 90%
3 to 1 Typical
Complete from line. Output neutral bonded to ground
-120 dB Common-Mode; -60 kB Transverse-Mode
Sealed maintenance-free (AGM) battery
Conforms to UL Standards
Consult OnLine Power
Sealed, Maintenance-Free, AGM, VRLA type
192 VDC
192 VDC
288 VDC
Circuit Breaker
Batteries not housed in Same Enclosure as electronic (See Table 2-2)
A-1
30/24
40/32
50/40
288 VDC
312 VDC
552 VDC
62.5/50
552 VDC
Advertisement
Table of Contents
