Table of Contents
Advertisement
OnLine Power
6.18.6.8
MENU SELECTON:
The following menu selection options are avalable and the typical samples are shown in next pages.
A. INFORMATION:
SYSTEM STATUS -
BASIC INFORMATION- Show about U.P.S manufacturer/ UPS firmware revision / UPS model.
CURRENT STATUS-
REMOTE CONTROL-
METER / CHART-
B. CONFIGURATION :
UPS CONFIGURATION-Set the UPS configuration such as NO. of batteries, charge voltage, date of last
UPS ON/OFF SCHEDULE-Schedule on/off time for the UPS & set the time to turn on/off the UPS on
NETWORK:
SNMP-
Show system information and network settings values shown here are by users.
Show the UPS current status. Users can choose an internal. They are input,
output, and battery status.
Provide remote UPS test fuctions, presently not provided.
Displays temperature, capacity, load, voltage of the UPS by a chart and by
appearing with meters diagram, input voltage, output voltage, temperature,
frequency, load , and capacity.
battery replacement, UPS data log, UPS test schedule, length of UPS
testing,critical loading (%), temperature (C), and critical capacity (%).
particular days, weekly, and send a warning massege before a schedule
shutdown and wake On-LAN to wake the PC within the network.
•
Set IP address, net agent subnet mask, net agent gateway and obtain an IP address.
•
Sert primary DNS server IP, secondary DNS server IP.
•
Set comunication speed fet ween net agent and network.
•
Set stop UPS communication when net agent disconnects with athernet.
•
Allow the user to alias a dymanic IP address.
•
Register a domain name, login name, login password.
•
Allow Net Agent to connect the internet directly using your XDSL modem with
login name and login password.
•
Set net agent SNMP settings so it can be used by a NMS.
•
Give system name, a name to administrator, net agent location.
6-25
Advertisement
Table of Contents
