Table of Contents
Advertisement
OnLine Power
LED SUM ALARM:
UPS is failed by critical alarm condition.
6.21.4
Push " LOG" switch, then screen will show all events with date and name following screen is a sample.
Event log
2/24/08, 11 INP UV
2/24/08, 11 INP BAD
2/24/08, 11 INP BAD
2/24/08, 11 INP TEST
LOG
Push "LOG" switch again, then screen will go to (1), and continuously keep rolling from (1), (2), and (3).
STATUS SCREEN
UPS NORMAL @ 3KVA
INPUT OK
@ CHRG OFF
BATT OK
@ DC OK
ON INVERT
@ OUT OK
(1)
(1)
FREEZE
TEST
SYSTEM MEASUREMENT SCREEN
OUTPUT: 122V @ 01923W
(2)
INPUT:118V @ 19A
DCBUS: 166V @ NA A
BATT: 013V @+000A
(2)
Push "FREEZE" switch, then previous screen before
freeze will show and display continuously without
rolling (see sample below)
If want to freeze (1) , (2) or (3) screen display, push "FREEZE"
switch at (2)for (1), at (3) for 2 and at (1) for 3 display
6-44
MULTI OUTPUTS
OUTPUT VOLT: 122V
OUTPUT VOLT: 211V
OUTPUT VOLT: 244V
OUTPUT VOLT: 280V
(3)
(3)
OUTPUT: 122V @ 01923W
INPUT:118V @ 19A
DCBUS: 166V @ NA A
BATT: 113V @ +000A
log
freeze
test
Advertisement
Table of Contents
