Table of Contents
Advertisement
OnLine Power
6.19 OPTIONAL ECC - EMERGENCY CIRCUIT CONVERTER – P/N 9100-1501
6.19.1 Installation
Indoor use only. Simple and fast installation in ceiling or wall mounted standard single gang E-box . Installation
must be performed by a qualified electrician per Installation, Operation and Maintenance Instructions, provided
with the ECC.
6.19.2 Operation
When used with an inverter system, the ECC is designed to allow you the ability to turn off ALL of the lighting in a
given area via the local switch, and still provide emergency lighting during a power failure. The device will provide
single phase power from the emergency source to the designated emergency fixtures regardless of their current
status (on or off), thereby insuring safe egress from the facility at all times. The automatic Diagnostic feature will
confirm the emergency system is ready to provide back up power.
6.19.3 Specification
Description:
Part Number:
Rating:
Operating Temperature: 20 to 150 F
Flame rating:
Size:
Color:
Weight:
ILLUSTRATION 6-12: ECC EMERGENCY CIRCUIT CONVERTER
ECC - EMERGENCY CIRCUIT CONVERTER OPTION
9100-1501-01 - 120 VAC
9100-1501-01- 277 VAC
120 VAC - 20 A Ballast load, 1000 W Tungsten Lamp load, 20 A, 1 HP
277 VAC – 20 A Ballast load, 1800 W Tungsten Lamp load, 20 A, 1.5 HP
UL 94V-O
2.75"W x 4.75"H x 1.75"D (overall)
Low profile – recessed portion is only 1.5" deep
White
8 oz.
EMERGENCY
POWER
TEST
SWITCH
UTILITY
POWER
6-40
Advertisement
Table of Contents
