Table of Contents
Advertisement
OnLine Power
6.18.5.2
OPERATION
The dial-up Monitor 2000 measures and monitors the following set of parometers
and status contacts.
1. Input Volts
2. Output Volts
3. Output AMPS
4. Battery run
5. Low battery
6. Cabinet temperature (ºF)
7. On by-pass
8. Summary alarm
User can monitor all inputs in real time graphical form and can access real time input monitoring
from the
tool bar button labeled monitors.
The details are given in GMS 2000 Manual, refer to the 6002-1770.( GMS 2000 user's manual)
6.18.5.3
ALARMS
When an alarm occurs, the unit will dial out and send a message to all programmed
destination.
GMS 2000 will call up to 32 telephone numbers or email addresses (both referred to as
destinations) to report alarm conditions or send reports. Destinations can be voice calls, fax
machine, computers with dodems running GMS 2000 software, email addresses, numeric pagers,
or alphanumeric papers. You must be online with the unit to program the Destination parameters.
Once you are online, choose Program from the main menu, then select Destinations. You can
also access the Destination programming from the toolbar button labeled Destinations.
The Dialout Destinations form allows you to program information for up to 32 destinations. The
parameters and their options are listed below.
Dialout Destinations Form
6-13
Advertisement
Table of Contents
