Table of Contents
Advertisement
OnLine Power
6.18.6
GMS WEB/SNMP (GWS) , STATUS, ALARM, EVENT LOG, E-MAIL 9100-1469-01
6.18.6.1 Description
The GWS option card is a web enabled monitoring device for a UPS with Internet access.
RJ45 on the front of the card marked " Network" is the connecting point for the Ethernet cable. The unique
IP Internet address is pre-assigned and can be change to fit customer network settings.
6.18.6.2 Operation
The GWS card can monitor the UPS on the network through a web browser or a Network Management
System. The alarm Viewer utility program provides monitoring of multiple units through a single console
application. Entering IP address assigned to the Web card into the browser brings up the Log-In screen with
password protecting the actual web site. The main, UPS Status screen has links to subsequent Web pages as
depicted below.
For detail operation, refer to the user's manual number , 6002-1988 This manual comes with this option,
9100-1469-01
6.18.6.3 Networking with GWS
The GWS gives the user two options when it comes to network connection. The user may choose to
manage and control the various serial devices over Internet using windows Virtual COM poet functions
(refer to fig.1) In this configuration, a GWS is connected to a serial device. The user can then manage and
control each GWS these serial devices over LAN.
GWS
6-19
UPS
PCBD
( J8 )
Advertisement
Table of Contents
