Allen + Roth 3MVR44BSD User Manual page 9

ASSEMBLY INSTRUCTIONS
7. After wire connections, attach remote control
receiver (C) onto the canopy on motor assembly (D) by
preadhered double-sided foam tape as shown.
8. Lift motor assembly (D) up, aligning keyhole slots on
canopy of motor assembly (D) with preassembled
screws on mounting plate (A) . Install the screws
removed in step 4. Tighten all screws securely.
9. Lift the decorative ring (B) up, aligning notches on
canopy of motor assembly (D) with raised areas
on inside of decorative ring (B) and pop it onto
the canopy.
9
Double-sided foam tape