Preparation - Allen + Roth 3MVR44BSD User Manual

HARDWARE CONTENTS
Note:
• Extra hardware EE, FF and GG should be used in step 1 in the assembly instructions if they
are needed.
• Extra hardware JJ should be used in step 12 in the assembly instructions if it is needed.
• Extra hardware KK should be used in step 8 in the assembly instructions if it is needed.
• Extra hardware LL should be used in step 14 in the assembly instructions if it is needed.
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with
package contents list and hardware contents. If any part is missing or damaged, do not attempt
to assemble the product. Contact customer service for replacement parts.
Estimated Assembly Time: 30 minutes
Tools Required for Assembly (not included): Phillips screwdriver, step ladder, electrical tape,
pliers, wire cutter, wire stripper.
WARNING: Before starting assembly of this product, please disconnect power to area and
familiarize yourself with the safety information provided on page 2 and 3.
6