Cycle Guide - Whirlpool HybridCare WED99HEDW Use & Care Manual

OPTIONS
7
Drum Light
D
Touch to turn the LED drum light on or off. The light
will also turn on when the door is open, and turn off
automatically after about 5 minutes.
Cycle Signal
E
Use this to turn the signal indicating the end
of a drying cycle on or off.
NOTE: You may also turn off the tones that sound
when a feature, setting, or option is touched. Touch
and hold Cycle Signal for about one second to turn
sounds on or off.
Cycle Guide – Automatic Cycles
Settings and options shown in bold are default settings for that cycle.
If settings are changed, the new settings will be remembered. If there is a power failure, settings will return to the default.
Not all settings and options are available on each cycle.
Use Automatic Cycles for better fabric care and energy savings
The dryer senses moisture in the load or air temperature and shuts off when the load reaches the selected dryness level.
Use the NORMAL dryness level to provide optimal energy savings.
Items Cycle:
to dry:
Work clothes, Normal
mixed cottons,
corduroys
Jackets, Bulky
comforters,
pillows, sheets
Heavyweight Heavy Duty
items, or heavy
work clothes
Large loads of Towels
cotton towels
Undergarments, Delicates
blouses,
lingerie,
performance
wear
Shirts, blouses, Casual
casual wear,
permanent
press,
synthetics,
lightweight
items
* Shows the range of default times based on Speed or Eco HybridCare™ Energy option selected. Times may vary depending on load
size, cycle, and options selected.
6
Temp: Dryness Default Time
Level: Speed/Eco*:
Medium More
Normal
Less
Medium More
Normal
Less
High
More
Normal
Less
High More
Normal
Less
Extra More
Low Normal
Less
Low
More
Normal
Less
Control Lock
F
Use to lock the controls of the dryer and avoid
an accidental change in cycle options or preferences
during a drying cycle.
Touch and hold CONTROL LOCK for 3 seconds to
lock or unlock the controls of the dryer. During this
time, the LED Display will count down 3-2-1. Once
the controls are locked, the LED Display will display
"Lc" or "Loc."
NOTE: The Control Lock function may be enabled
when recovering from a power failure. To unlock the
control, touch and hold CONTROL LOCK for at least
3 seconds.
Energy
Options:
:53/1:23 Speed
Balanced
Eco
1:05/1:35 Speed
Balanced
Eco
1:00/1:30
Speed
Balanced
Eco
1:07/1:37 Speed
Balanced
Eco
:38/1:08 Speed
Balanced
Eco
:50/1:20
Speed
Balanced
Eco
Available Cycle Details:
Options:
Damp Uses Medium heat
Dry Signal to dry large loads of
mixed fabrics and
Wrinkle
items.
Shield
™
Damp Dry Use for drying large,
Signal bulky items; do not
overfill dryer drum.
Wrinkle
Partway through the
Shield
™
cycle, the signal will
sound to indicate
when it is time to
rearrange items for
optimal drying.
Damp Offers stepped
Dry Signal drying starting with
High heat followed
Wrinkle
by Medium heat
Shield
™
for enhanced fabric
care and energy
savings.
Damp This is a high
Dry Signal heat cycle. Use
for large loads of
Wrinkle
heavyweight fabrics
Shield
™
such as cotton
towels.
Damp Uses Extra Low
Dry Signal heat to gently dry
delicate items.
Wrinkle
Shield
™
Damp Uses a stepped
Dry Signal drying temperature
from Medium to
Wrinkle
Low for improved
Shield
™
moisture removal
and enhanced fabric
care. Casual is the
preferred energy
cycle.