Qos Service - ZyXEL Communications P-2612HNU-Fx Support Notes

QoS Service

Introduction of QoS
Quality of Service (QoS) refers to both a network' s ability to deliver data with
Ÿ
minimum delay, and to the networking methods used to control the use of
bandwidth. QoS allows the ZyXEL Device to group and prioritize application
traffic and fine-tune network performance.
Without QoS, all traffic data is equally likely to be dropped when the network is
Ÿ
congested. This can cause a reduction in network performance and make the
network unfit for time critical application such and video-on-demand and VoIP.
1. Click Advanced > QoS > General, and activate the QoS service, then set
the Maximum Upstream bandwidth value to 509 to fully utilize WAN
bandwidth.
All contents copyright (c) 2010 ZyXEL Communications Corporation.
P2612HNU Fx Support Notes
31