General Application Notes; Why Use The P-2612Hnu-Fx - ZyXEL Communications P-2612HNU-Fx Support Notes

General Application Notes

P-2612HNU-Fx support note is applied to both P-2612HNU-F1, and P-2612HNU-F3
models. The differences between these two models are:
F1 supports Annex A, and F3 supports Annex B.
Ø
For F1, the DSL line connector is RJ-11, and for F3, the DSL line connector is
Ø
RJ-45.

Why use the P-2612HNU-Fx?

Key features of the P-2612HNU-Fx
•
The P-2612HNU-Fx is an ADSL2+ integrated access device (IAD), which
provides high-speed ADSL Internet access
providers to meet the worldwide market requirements of triple-play services
This model also features built-in 802.11n WLAN which allows for simple
on-site deployment without wires. Two lines of telephony service are provided
using VoIP technology with SIP signaling protocol.
incorporates dual WAN functionality, suitable for Switch/DSLAM or WiMax
users. Users may also leverage the build-in USB interface for file sharing.
Ÿ Dual WAN to Simplify the Logistics for ISP
When a customer migrates from ADSL2+ to Switch/DSLAM or WiMax, the ISP
only needs to install a simple and relatively cheap bridge-device terminating
the physical connection, and providing an Ethernet-interface for the customer.
The customer' s existing CPE will still be used for terminating the IP-connection
but now via the Ethernet WAN-interface. In most cases, the end-users can still
utilize their original CPE, rather than having to change their CPE when
migrating to a different physical connection.
Ÿ ADSL2+ functionality
The P-2612HNU-Fx series supports dual- mode functionality that enables
service providers to support ATM on the same device. It offers high speed
All contents copyright (c) 2010 ZyXEL Communications Corporation.
P2612HNU Fx Support Notes
in cooperation with major service
Additionally, the device
5
.