2.
Go to Network > WAN > Layer 2 Interface and click "Add" to add a new
Layer2 interface.
3.
Configure the PVC parameters (VPI/VCI). In this example, set 0/33.
4.
Please select "EoA" for PPPoE, IPoE, and Bridge DSL Link Type.
5.
Select "Default mode" in the Connection mode setting.
6.
Please set"Encapsulation Mode" to"UBR with PCR" for Data and IPTV
service for medium priority.
All contents copyright (c) 2010 ZyXEL Communications Corporation.
P2612HNU Fx Support Notes
13